Silk Gradient PLA+ 3D Printer Filament 1.75mm, Gradient White Purple Blue 1kg Spool Tri Color 3D Printing Filament.
【PLA+ Filament Advantages】--- PLA+ 3D Printer Filament is improved and upgraded based on PLA filament,
good adhesion performance ,high strength and better toughness.Clog/Bubble/Tangle/Warping/Stringing free,
high durability, better layer adhesion.iBOSS filaments are made with virgin materials, no pollution, non-toxic and no
odor during the printing.
【Dimensional Accuracy & Consistency】--- iBOSS 3D Printer PLA Plus filament of 1.75mm diameter,
Minimum tolerance and low warping to ensure consistent feeding and stable prints.Dimensional accuracy + / - 0.02 mm ;
1 kg spool (2.2lbs), which making filament that have an outstanding surface finish and are highly precise.
【Tangle Free & Bubble-Free & Clog-Free】--- Our 3D Printing Filaments are easy-to-use.Total Length: 340-350m.Recommended
Print Temperature:210-230℃.Melt well, feed smoothly and constantly without clogging the nozzle or extruder.Full mechanical
winding and strict manual examination,to make sure the line tidy and no-tangle.
| Model | PLA+ |
| Net Weight (KG) | 1KG |
| Gross weight | 1.3KG |
| Packing box size | 200×200×64mm |
| Color | White Purple Blue |
| Diameter(mm) | 1.75mm |
| Tolerance(mm) | ±0.02mm |
| Print Temperature (ºC) | 200-230ºC |
| Base plat Temperature (ºC) | 60°C |
| Density | 1.23±0.05g/cm3 |
| Printing Speed | 40-100m |
| Melt Index | 14-18g/10min (190ºC,2.16kg) |
| Bubble | 100% without bubble |
| Length of Line (Ø 1.75±0.2mm) | 1.75mm=330m |
| Tensile strength | ≥62Mpa |
| Flexural modulus | 1970 Mpa |
| Izod Notch Impact Strength | 7KJ/m2 |
| Elongation at Break | 52 or 53 (ºC, 0.45Mpa) |
| Hydroscopicity | 0.005 |
| Reel Size | Ø20.0cm * 6.4cm H |
